| |
|
 |
SR8002 THX® Select2 Surround Receiver
$1999.99
Do you call the SR8002 an “audiophile’s receiver” or a “videophile’s receiver”? May we suggest that the answer is simply “Yes”? Here, you’ll find the power, flexibility, and advanced performance you expect from Marantz. And a few surprises, too! All in a new chassis size that’s more convenient than ever.
- 125 Watts x 7 Channels All Discrete Amplifier Stage
- Current Feedback Amplification
- HDMI v1.3a Repeating/Switching: 4-In/2-Out
- Dolby® TrueHD, Dolby® Digital Plus, dts-HD™ Master Audio
- Deep Color, xvYCC and SA-CD Support by HDMI
- Up-Conversion (w/TBC) to HDMI with 480i/480p Converter
- Assignable Dual Component Outputs
- M-DAX (Marantz Dynamic Audio eXpander) for Compressed Audio
- HD-Radio
- XMHD Surround by Neural THX® Technologies
- Audyssey MultEQ
- Direct-Set Volume, Tuner Preset and XM Preset Commands
- Upgraded Binding Posts (Dielectric Protected)
- RS-232C control and IR Flasher Input
- IR Receiver Input and x2 IR Emitter Outputs
- x2 12V DC Trigger Output
- 2nd Zone Audio/Video Output and 3rd Zone Audio Output
- Stereo/Mono Switching for 2nd/3rd Zone
- RC8001SR Main-Room & RC-101M Multi-Room Remotes Included
- <16” Shallower Chassis
|
|
|
|
| |
|
|
|
|
| |
|
Let’s begin with the obvious – THX ® Select2 certification. It’s your assurance that, in addition to the power you’ll need to fill average-sized rooms with theater-quality sound (125 watts continuous from each of its seven amplifiers), other performance parameters like signal-to-noise and distortion are absolutely first class.
Then there are the Marantz touches. A toroidal-based power supply. Current feedback amplification. An anti-interference copper plated chassis that’s less than 16” deep so it will fit in more places easily.
Adding to the audio flexibility is a 3rd Zone output (with an individually selectable source!) to make your SR8002 the center of a whole house distributed audio system.
On the A/V side, the SR8002 features HDMI switching (version 1.3a) for up to four sources and two display devices. And there’s format conversion to HDMI with Time Base Correction so even your older video sources will look their best. If you’re not quite ready for HDMI (or if your displays aren’t), the SR8002 offers two assignable component outputs, too. One infrared receiver input and two IR outputs add enormous control flexibility as do two DC “trigger” outputs.
Dolby® TrueHD, Dolby® Digital Plus and dts-HD™ Master Audio are the next wave of high resolution sound and the SR8002 incorporates the all.
The SR8002 is also one of the few receivers to feature Audyssey’s unique auto calibration capability. This is a significant improvement over previous “room correction” strategies in that it improves the listening characteristics of your entire room rather than for just one or two seats.
In short, the Marantz SR8002 is simply a culmination of everything you’ve come to expect from us. Refined cosmetics. Sterling performance. Sophisticated advanced to enhance your enjoyment. Let’s put this even more succinctly – it’s a Marantz!
|
FEATURES
|
|
MULTI CHANNEL/SURROUND
|
|
Number of Channels
|
|
THX
|
|
DTS
|
|
Dolby
|
|
DSD(SA-CD)/NEURAL
|
|
SRS
|
|
SOUND ENHANCEMENTS
|
|
HDCD Decoder
|
|
Current Feedback Topology
|
|
Discrete Amplification
|
|
Power Transformer
|
|
D/A Conversion
|
|
Digital Signal Processing
|
|
Video Off (Pure Direct)
|
|
Source Direct
|
|
Chassis
|
|
Variable X-over
|
|
Display Off
|
|
Video Up-conversion
|
|
Auto Calibration by MIC
|
|
Satellite Radio Ready
|
|
AM/FM tuner
|
|
Bass management
|
|
Lip-sync (digital audio delay)
|
|
Software Upgradable
|
|
IN/OUTPUTS
|
|
VIDEO
|
|
HDMI In
|
|
Component In
|
|
S-Video In
|
|
Composite In
|
|
HDMI Out
|
|
Component Out
|
|
S-Video Out
|
|
Composite Out
|
|
AUDIO
|
|
Analog L&R In
|
|
Analog L&R Out
|
|
Digital Optical In
|
|
Digital Coaxial In
|
|
Digital Optical Out
|
|
Digital Coaxial Out
|
|
Other
|
|
OTHER
|
|
Pre-Amplifier Out
|
|
Main Amplifier In
|
|
Multi-Channel In
|
|
Multi-Room Audio Out
|
|
Multi-Room Video Out
|
|
Multi-Room Speaker Out
|
|
Speaker A/B
|
|
Networking
|
|
External control
|
|
DC Triggers
|
|
D-Bus Remote (RC-5) In/Out
|
|
Flasher In/IR Receiver In/Emitter out
|
|
Front Panel A/V Inputs
|
|
Headphone Out
|
|
AC Outlets (Switched/Unswitched)
|
|
SPECIFICATIONS
|
|
AUDIO SECTION
|
|
Power Output (8 Ohm)
|
|
S/N Ratio
|
|
Freq. Response (Analog In)
|
|
Freq. Response (Dig In)
|
|
TUNER SECTION FM
|
|
Frequency Range
|
|
S/N Ratio (Mono/Stereo)
|
|
TUNER SECTION AM
|
|
Frequency Range
|
|
S/N Ratio
|
|
VIDEO SECTION
|
|
Video Freq. Response (Component)
|
|
Video Freq. Response (Composit, S-Video)
|
|
Signal to Noise
|
|
GENERAL
|
|
Color
|
|
Front Panel
|
|
Remote Controller
|
|
Power Requirement
|
|
Power Consumption
|
|
Dimensions W" x H" x D" (Inches)
|
|
Weight (lbs)
|
|
| |
| |
|
7 ch Amp. / 7.1 ch Processing
|
|
Select2
|
|
HD Master&High Res. Audio/ES/96/24/Discrete&Matrix6.1/Neo:6
|
|
TrueHD/Digital Plus&EX/Pro Logic IIx/Virtual Speaker/Headphone
|
|
DSD Decoding via HDMI/Neural-THX (for XM Radio)
|
|
Circle Surround II
|
| |
|
|
|
all 7 channels
|
|
Toroidal
|
|
192kHz/24-Bit
|
|
TI 32-Bit
|
|
|
|
Copper Plated
|
|
|
|
|
Audyssey MultEQ
|
|
XM
|
|
AM/FM x1 + HD Radio
|
|
|
|
via RS-232C
|
| |
| |
|
4
|
|
4
|
|
5 (incl. Front)
|
|
5 (incl. Front)
|
|
2 (Discrete Commands for each output)
|
|
2
|
|
3 (incl. Monitor Out)
|
|
4 (incl. Monitor Out&Multi Zone Out)
|
| |
|
8 (incl. Front & AUX2(L&R of 7.1 ch In))
|
|
4
|
|
4 (incl. Front)
|
|
3
|
|
1
|
|
1
|
|
-
|
| |
|
7.1ch x1
|
|
-
|
|
7.1 ch
|
|
Analog L/R x2 for 2nd&3rd Zone
|
|
Compornent x1, Video x1 for 2nd Zone
|
|
|
X (also Speaker C function)
|
|
-
|
|
RS-232C
|
|
Out x2
|
|
1/1 (Main Zone) + 1/1 (Multi Zone)
|
|
1/1/2
|
|
S-Video/Video/Analog L&R/Digital Optical
|
|
1
|
|
1/1
|
| |
| |
|
125W x 7
|
|
105dB
|
|
8Hz - 100kHz (+/- 3 dB)
|
|
8Hz - 45kHz (+/- 3 dB)
|
| |
|
87.5 - 108.0MHz
|
|
75/70dB
|
| |
|
520 - 1710kHz
|
|
50dB
|
| |
|
5Hz - 80MHz (-1dB)
|
|
5Hz - 8MHz (-1dB)
|
|
60dB
|
| |
|
Black
|
|
Aluminum
|
|
RC8001SR (Main Zone) + RC101M (Multi Zone)
|
|
AC 120V 60Hz
|
|
780W
|
|
17 5/16" x 7 1/4" x 15 5/8"
|
|
33.1
|
|
RC101 Third Zone Remote

|
|
|
A perfect companion to our SR8002 multi zone receiver, the RC101 comes preset to control the third zone. No flipping a switch, no multiple button presses to active zone three, every button is already programmed by default to control your third zone.
- Simple Multi-zone remote
- Main-zone control plus Multi-zone A, B and C (for future use)
- Discrete Input select
- Preset IR code library (TV, CD, DVD and DSS)
- IR learning function
- Cloning function
- Backlighting
|
|
$39.99
|
|
|
|
VS3002 HDMI v1.3a Compatible Switcher

|
|
|
This groundbreaking product was designed to make everyone’s life a lot less complicated. As HDMI inputs become more common amongst source products, the need for a great performing and extremely reliable HDMI switcher is evident.
- 6 HDMI inputs and 2 HDMI outputs
- Direct IR and RS-232C input
- Discrete Code Set for virtually every command
- Remote Controller Included
- Exclusive Sync Mode via Marantz Remote Control Bus(RC-5) for use w/Marantz AV Receivers/DLP Projectors
|
|
$349.99
|
|
|
|
RC9001 Control System

|
|
|
For advance control of your SR8002 and the rest of your system, consider the RC9001 remote system controller. In addition to being able to control your devices by either Infrared or serial via RS-232, this remarkable controller can even control certain devices over a wireless home network. Since the RC9001 uses your home network to communicate, you will find it much more flexible than IR or RF remotes,
|
|
$1499.99
|
|
|
|
Manuals and Documents:
Downloads:
-
IR Database "xcf file" for Marantz AV Receiver Common
-
SR8002_Rear Panel Drawing
|
Version:
|
|
|
|
Date Posted:
|
|
2/25/2008
|
|
Size:
|
|
268KB
|
|
File Type:
|
|
ZIP
|
|
Download:
|
|
SR8002_Rear Panel Drawing
|
|
Notes:
|
|
.DXF & .PDF Format File
|
-
SR8002 RC IR File
|
Version:
|
|
|
|
Date Posted:
|
|
9/30/2007
|
|
Size:
|
|
176kb
|
|
File Type:
|
|
ZIP
|
|
Download:
|
|
SR8002 RC IR File
|
|
Notes:
|
|
N/A
|
-
SR8002 pcf File
|
Version:
|
|
|
|
Date Posted:
|
|
9/29/2007
|
|
Size:
|
|
6MB
|
|
File Type:
|
|
ZIP
|
|
Download:
|
|
SR8002 pcf File
|
|
Notes:
|
|
For use with RC9500 or Wizz.it 9 editor
|
-
SR8002 RS232c Control Codes
-
SR8002 Crestron Sample File
|
Version:
|
|
|
|
Date Posted:
|
|
2/1/2008
|
|
Size:
|
|
358KB
|
|
File Type:
|
|
ZIP
|
|
Download:
|
|
SR8002 Crestron Sample File
|
|
Notes:
|
|
.umc, .vtp and .smw format files for Crestron
|
|
|
|
| |
|
|
|
|
|
 |
|